December 12, 2013
See our straight edge testing in action in this video from Face Consultants.
Straight Edge Tests can be carried out to check for compliance with British Standards BS8204 Part 2 : 2003 to see if the SR1, SR2, or SR3 classifications are being achieved. These are usually but not always specified in retail units where tiling is to be received. We can also carry out a Straight Edge Tests using a 3m Straight Edge, on feet, for checking plus or minus deviations from a given number over a 3m length. For example, checking for no more than plus or minus 5mm under a 3m Straight Edge.
Find out more about our surface regularity testing services.
"We at John Sisk & Son Limited would like to..."
Contracts Manager John Sisk & Son Ltd
"Thank you for the results, which certainly make for interesting..."
Senior ManagerLeading Manufacturer (Leisure Industry)
"Your service has been first class"
Director, BSP Consulting
Director BSP Consulting