Abrasion Resistance Testing [Video]

September 9, 2013

See our Abrasion Testing process in action in this video from Face.

Video Transcript

A floors ability to resist abrasion is a very important factor. To carry out an abrasion test, eight test locations are marked on the floor using a machined template. Readings are then taken at each of the eight test locations using a digital depth gauge. The accelerated abrasion resistance testing machine is then bolted into place through pre-drilled fixing holes The machine then with its three steel hardened wheels and a combined weight of 65kg then rotates 2850 revolutions plus or minus 10 After the test the machine is removed and the digital depth readings are then taken at each of the eight locations again. The difference between the average two sets of readings gives a measure of the floors abrasion resistance.

Find out more about our abrasion resistance testing services.

For Advice

Contact the experts.

Get In Touch Today

"I would just like to write to let you know..."

Commercial Manager Twintec

"We have used Face Consultants Ltd for a number of..."

Project Manager Sir Robert McAlpine Ltd

"Thank you for the results, which certainly make for interesting..."

Senior ManagerLeading Manufacturer (Leisure Industry)

Read All Testimonials

Who Are Face Consultants

The CoGri Group, a leading international specialist in concrete flooring, with offices on every continent throughout the world.

The CoGri Group, a leading international specialist in concrete flooring, with offices on every continent throughout the world

Read More